Smart cities and smart energy, summary and opportunities
BSRIA / ECA Conference in Dublin 11th June 2015.
Bill Wright, Head of Energy Solutions, ECA, briefly summarised the previous papers and highlighted a few areas for further discussion / questioning.
A few topics that came to the fore in the presentations were:
Sustainability - what actually is the meaning of this? Is a business sustainable if it is highly energy efficient, uses recycled materials and has a very low carbon footprint, or is a sustainable business about being in business tomorrow? It is best to be a combination of both but what is the best mix? Ethics can also come into this. A difficult question which can be discussed at length!
Another area for discussion is who pays for the infrastructure put in place for smart cities? It was not so long ago that you paid for internet access in hotels and public areas, now it is generally regarded as being free, but is it? The costs are being absorbed into everyday prices as we begin to take internet access for granted. Ultimately we all pay. The installation of smart meters and their operation will be paid for by higher energy bills, but it is hoped that the cost will be offset by lower energy usage. Time will tell.
Smart meters were discussed and compared between the UK and Ireland. The Irish ‘thin’ meter seems more compatible with major software changes as all the ‘intelligence’ is in a central processor unit, away from the meter. The UK version has its own processor. There is a danger it will be obsolete before the units are installed.
Smart meters will bring remote monitoring down in price and improve availability of data as well as the reality of being able to monitor peoples’ actions in buildings. Another ethical question – how far do we go in this? Actions such as putting the kettle on or heating can be monitored bringing in the possibility of monitoring care homes – but this could lose the human contact.
There was considerable emphasis on smart grids and how the nature of power generation is changing as renewable energy sources at the periphery of the grid network are providing an increasing proportion of the power required. Networks were designed for central power plants distributing electricity to the periphery, not the other way round. Considerable effort has to be put in to keep the system stable as the proportion of renewable or local energy sources proliferate. New standards are being developed as part of the international wiring regulations on how to integrate all these systems together. These may appear in the next edition of the UK IET Wiring Regulations, BS7671.
There was mention of the European super grid where power can be transmitted east to west or north to south to enable power to be generated in the most advantageous places and moved to meet peak demands in different countries at different times.
All of this will be controlled by, or use the internet for communication. How secure is this? Many examples are available of systems being hacked into and taken over. How can this be stopped when we become ever more reliant on secure communications? Systems must be designed in such a way so as to be impregnable.
The redevelopment of the Dublin Institute of Technology was highlighted as a good example of sustainable development where many systems, designs and constructions could be integrated on a new site to give an excellent performing series of buildings. Good initial design and programming the construction is the key to the success of this.
All of this brings the building controls industry into greater importance and the profession must grasp this and ensure that systems are designed and installed to the highest standards. This gives many opportunities to get involved, especially on the installation side where it is seen to be strictly for specialists at present. New areas of building design such as power over data and low-voltage direct current (LVDC) systems should be grasped and brought into use to improve energy use and overall sustainability. The recent announcement by Tesla of the home battery system to enable photovoltaic (PV) systems to store energy to be used overnight is an exciting development.
Bill Wright
Electrical Contractors’ Association
--BSRIA
Featured articles and news
A change to adoptive architecture
Effects of global weather warming on architectural detailing, material choice and human interaction.
How big is the problem and what can we do to mitigate the effects?
Overheating guidance and tools for building designers
A number of cool guides to help with the heat.
The UK's Modern Industrial Strategy: A 10 year plan
Previous consultation criticism, current key elements and general support with some persisting reservations.
Building Safety Regulator reforms
New roles, new staff and a new fast track service pave the way for a single construction regulator.
Architectural Technologist CPDs and Communications
CIAT CPD… and how you can do it!
Cooling centres and cool spaces
Managing extreme heat in cities by directing the public to places for heat stress relief and water sources.
Winter gardens: A brief history and warm variations
Extending the season with glass in different forms and terms.
Restoring Great Yarmouth's Winter Gardens
Transforming one of the least sustainable constructions imaginable.
Construction Skills Mission Board launch sector drive
Newly formed government and industry collaboration set strategy for recruiting an additional 100,000 construction workers a year.
New Architects Code comes into effect in September 2025
ARB Architects Code of Conduct and Practice available with ongoing consultation regarding guidance.
Welsh Skills Body (Medr) launches ambitious plan
The new skills body brings together funding and regulation of tertiary education and research for the devolved nation.
Paul Gandy FCIOB announced as next CIOB President
Former Tilbury Douglas CEO takes helm.
UK Infrastructure: A 10 Year Strategy. In brief with reactions
With the National Infrastructure and Service Transformation Authority (NISTA).
Ebenezer Howard: inventor of the garden city. Book review.
Airtightness Topic Guide BSRIA TG 27/2025
Explaining the basics of airtightness, what it is, why it's important, when it's required and how it's carried out.